Delta VFD-L Drives: Ordering Codes and Version Differences
Identify the exact VFD-L reference before selecting a wiring diagram. The A- and W-ending models on this page have model-specific supply and terminal information.
- VFD002L21A
- VFD004L21A
- VFD007L21A
- VFD015L21W
- VFD022L21W
When a purchase list says “Delta VFD-L,” the useful next question is which complete ordering code is installed. WOOLARS accepts inquiries for the five references below. Delta’s instruction sheet lists them separately and includes model-specific wiring notes; a shared L21 code does not make every terminal arrangement identical.
Five VFD-L references at a glance
| Complete model | Applicable motor capacity reference (kW) |
|---|---|
| VFD002L21A | 0.2 |
| VFD004L21A | 0.4 |
| VFD007L21A | 0.75 |
| VFD015L21W | 1.5 |
| VFD022L21W | 2.2 |
Source: Delta VFD-L instruction sheet, model explanation and wiring sections. Capacity is a model-identification reference, not a substitute for checking the motor current and application conditions.

The A models: L21 does not mean single-phase only
For VFD002L21A, VFD004L21A and VFD007L21A, the instruction sheet explicitly permits single-phase or three-phase input. Its VFD007L21A nameplate example shows 200–240 V input and three-phase motor output.
That distinction matters when identifying an existing machine: the available mains phase and the motor’s output-side phase are different pieces of information. Record the actual supply arrangement rather than inferring it from a shortened “L21” description.
The W models: find the model-specific wiring reference
VFD015L21W appears in the instruction sheet’s main-circuit Figure 1, with a specific note identifying S/L2 and T/L3 as its input-power terminals. VFD022L21W has a separate main-circuit Figure 2.
For purchasing or replacement planning, this means the wiring reference must follow the exact model. The A-model supply statement above should not be extended to the W models without their applicable specifications. This page does not present A and W as an upgrade sequence or establish direct interchangeability.
Match the control diagram as well as the power diagram
The instruction sheet separates NPN control diagrams by model group. Identify the existing model and use its corresponding diagram when reviewing the machine’s control connections. A similar-looking keypad or terminal cover is not enough to choose the diagram.
Use the linked manufacturer document for the complete drawings and conditions. The terminal references here explain the identification issue; they are not installation or rewiring instructions.
Request the VFD-L reference you need: send WOOLARS the complete code and quantity through Get A Quote. If you are identifying an existing installation, include its nameplate and a photograph showing the terminal labels. Product condition and availability are confirmed with the quotation.