Mitsubishi MR-J4 Series

• MR-J4-A (General Interface)
  The MR-J4-A features standard pulse sequence instruction interfaces and analog voltage input instruction interfaces, allowing switching between position, speed, and torque control modes. It supports a pulse frequency of 4MPPS with standard instruction.

• MR-J4-B (SSCNET II/H Interface)
  The communication speed is 150Mbps, with a communication cycle of 0.22ms. It supports a maximum wiring distance of 6400m and a maximum station distance of 100m for up to 64 axes. Since it uses the same optical fiber cable as traditional SSCNET III/H, it is fully compatible and easy to interchange.

Mitsubishi Servo Amplifier MR-J4 Series

• MR-J4W3-B/MR-JW2-B (SSCNET II/H Interface, Multi-Axis Integrated Servo Amplifier)
  These models inherit the high performance, multi-functionality, and convenience of the MR-J4-B, but with the added capability of driving two or three servo motors with a single amplifier. Compared to the MR-J4-B, the MR-J4W2-B saves 25%-30% of installation space, while the MR-J4W3-B saves about 30%. These amplifiers are designed for the SSCNET II/H motion control network and can simultaneously drive two servo motors, saving installation space and wiring. They come standard with full closed-loop control and can drive both rotary and linear servo motors.

Mitsubishi Motor for MR-J4 series：
HG-KR Series:
HG-KR13, HG-KR13B, HG-KR13K, HG-KR13J, HG-KR13BJ
HG-KR23, HG-KR23B, HG-KR23K, HG-KR23J, HG-KR23BJ
HG-KR43, HG-KR43B, HG-KR43K, HG-43BK, HG-KR43J, HG-KR43BJ
HG-KR73, HG-KR73B, HG-KR73K, HG-73BK, HG-KR73J, HG-KR73BJ
HG-SR Series:

HG-SR421J, HG-SR421BJ.
HG-JR Series:
HG-JR11K1M, HG-JR11K1M4.
HG-JR15K1M, HG-JR15K1M4.
HG-JR22K1M, HG-JR22K1M4.
HG-JR53.
HG-JR73.
HG-JR103, JR103B.
HG-JR153, JR153B,.
HG-JR203, HG-JR203J, JR203B
HG-JR353, JR353B.
HG-JR503.
HG-JR703,
HG-JR903.

Combination of Motor and Amplifier: